Refrigeration Air Dryer

AmcareMed refrigerated dryers reduce the compressed air temperature by using refrigerant.
The water vapor in compressed air supersaturate at low temperatures and condense into liquid droplets, which are then separated from the compressed air by condensing water (including oil and dust) through air-water separation device.

Product Detail

AmcareMed refrigeration air dryer is based on the principle of freezing and dehumidification, and the humid and hot compressed air is
exchanged through the evaporator, so that the gaseous water in the compressed air is condensed into liquid water, which is formed
into liquid water through gas-water separation, and is drained out of the machine through the gas-water separator.

Specifications

  • Working pressure: 0.7-10Mpa (Use scope 0.7Mpa-1Mpa)
  • Inlet temperature: maximum 45℃
  • Ambient temperature: 2℃~38℃
  • The temperature difference between the entrance and exit is 5-10℃
  • Low pressure dew point: 3℃ (-22℃ atmospheric pressure dew point)
  • High-efficiency aluminum plate heat exchanger unit, good heat dissipation effect and small pressure drop
  • Compressed air flows through parts for spray treatment.
  • Unique design of gas-liquid separation, sewage thoroughly.

Model

Model Flow rate
m³/min
Dimentions
mm
Power
W
Weight
KG
Refrigerant Pipe Size
PRIMAK D2-10 1 430*354*463 220 30 R134a G3/4
PRIMAK D2-13 1.3 548*400*615 360 36 R134a G3/4
PRIMAK D2-21 2.1 548*400*615 370 38 R134a G3/4
PRIMAK D2-40 4 600*520*750 700 56 R410A G1
PRIMAK D2-66 6.6 600*520*750 1050 58 R410A G1-1/2
PRIMAK D2-85 8.5 650*650*875 1100 75 R410A G1-1/2
PRIMAK D2-105 10.5 650*650*875 1150 79 R410A G2
PRIMAK D2-140 14 752*745*960 1400 102 R410A G2
PRIMAK D2-175 17.5 752*800*1020 1650 119 R410A G2
PRIMAK D2-220 22 927*795*1126 2650 168 R410A G2-1/2
PRIMAK D2-260 26 927*795*1126 2900 174 R410A G2-1/2
Scroll to Top